[Online Tracking]

[Down Load]

[Contact Us]

        World First SMS/SMTP/HTTP/TCPIP Multi Mode Mobile Asset Tracking System                                 

 

Home

What's StarG3

Why StarG3

How Save Cost

Hardware

Software

Map

White Paper

 

Copyright 2004

Pudlington Technologies Pte Ltd

 

 

PS662 IVU

[Specifications] [GPS Positioning] [GSM Communication] [General] [Input/Output] [SMS Command] [Setting Range]

Specifications

  GPS Positioning  
  Latitude Range: 0~90.0 degree
  Longitude Range: -180.0~+180.0 degree
  Speed Range: 0~250 kph
  GPS Frequency: 1575.42 MHz
  Channels: 12
  Position Accuracy: 5 m (CEP)
  Speed Accuracy: 1 kph
  Time Accruacy: 1 sec
  Sensitivity: -158 dBm
  Cold Start Time: 45 sec (Average)
  GPS Antenna: External (Active, 5VDC, SMA)
    
  GSM Communication  
  GSM Band: EGSM900, GSM1800
  Transmit Power: Class 4 for EGSM900
   Class 1 for GSM1800
  Receive Sensitivity: -102 dBm
  GPRS Connectivity: Multi-slot Class 8, Mobile Station Class B
  SIM Card Interface: 3V SIM Card
  SIM Card Holder: Plug in with StarG3 SelfLock
  GSM Antenna: External  (SMA) or Build-in (Optional)
    
  General  
  Connectivity: 2 wires (DC+, DC-)
  Power Supply: 9~36 VDC, 0.5 Amax
  Backup Battery Time: 10 minutes (Optional)
  Operation Temperature: -10~+70 C
  Storage Temperature: -40~+85 C
  Operation Humidity: 0~90 %
  Dimension: 120x100.6x32 mm3
    
  Input/Output  
  Audio-in Mode: Differential
  Audio-in Voltage: 0~1.03 Vpp
  Audio-in Impedance: 2.0 kOhms
  Mic Supply Voltage: 2.25 V(typical)
  Audio-out Mode: Differential
  Audio-out Voltage: 0~4.07 Vpp
  Audio-out Impedance: 15 Ohms
  Audio-out Offset: < 100 mV
  Engine-in High Voltage: 2.5~30 V
  Engine-in Low Voltage: 0~0.7 V
  Engine-in Impedance: > 10 kOhms
  Alarm-in High Voltage: 2.5~30 V
  Alarm-in Low Voltage: 0~0.7 V
  Alarm-in Impedance: > 10 kOhms
  Button-in Impedance: > 10 kOhms
  Relay 1 Contact; Normal Open (Fast Action)
  Relay 1 Voltage Rating: 30 VDC
  Relay 1 Current Rating: 1 A
  Relay 2 Contract: Normal Close (Safe Action)
  Relay 2 Voltage Rating: 30 VDC
  Relay 2 Current Rating: 1 A
    
  SMS Command  
  *QST: Query for Status
  *QSE: Query for Status Extent
  *SMD: Set Working Mode
  *SPW: Set Password
  *SDI: Set Dial Up Number for GPRS Connection
  *SAP: Set APN for GPRS Connection
  *SGU: Set User Name for GPRS Login
  *SGP: Set Password for GPRS Login
  *SSM: Set SMTP Server
  *SFR: Set Email From Address for SMTP Mode
  *STO: Set Email To Address for SMTP Mode
  *SHT: Set HTTP Server
  *SIP: Set TCPIP Server
  *SDT: Set Distance & Time Interval
  *STZ: Set Time Zone
  *SOG: Set Origin Position
  *SDF: Recover Factory Default Setting
  *SAL: Set Auto Alert SMS Destination Number
  *SCA: Set Call Out Number
  *STK: Set Voice Talking Time
  *SRT: Set Ringing Time
  *ENA: Enable Extent Functions
  *DIS: Disable Extent Functions
  *CAL: Call to IVU
  *RLA: Close Relay1 Immediately
  *RLB: Open Relay2 When Vehicle Stop
  *CLR: Reset Relay1, Relay2, Alarm, Button Status
  *VER: Show Firmware Version
    
  Setting Range  
  Working Mode: SMS, SMTP, HTTP, TCPIP (default: SMS)
  Password: 6 Digital (default: 000000)
  GPRS Dial Up Number: 30 Alphabets (default: *99***1#)
  GPRS APN: 30 Alphabets (default: internet)
  GPRS User Name: 30 Alphabets (default: [empty]
  GPRS Password: 30 Alphabets (default: [empty]
  SMTP Server: 30 Alphabets (default: mail.starg3.com)
  Mail From Address: 30 Alphabets (default: [sn]@starg3.com)
  Mail To Address: 30 Alphabets (default: [sn]@starg3.com)
  HTTP Server: 30 Alphabets (default: www.starg3.com)
  TCPIP Server: 30 Alphabets (default: [empty]
  Distance Interval: 0 ~ 10000 m (default: 1000)
  Minimum Time Interval: 0 ~ 3600 sec (default: 10)
  Maximum Time Interval: 0 ~ 3600 sec (default: 3600)
Time Zone: -12 ~ +12 Hour (default: +8)

[Back to Top]